KE LOGEM 928, Operation Manual

Page: 86 / 200

86 Operation Manual V.34 - Modems, Version 07/97
AT
Chapter 3
AT\S Display Parameters
The command AT\S displays the current modem settings.
Example:
AT\S
Konfiguration:
F Betriebsart ............... Auto \X XON/XOFF-Weitergabe . 1 &T Teststellungen ............... 5
L Lautstärke ..................... 1 %C Kompressions-Mode ..... 1 &X Taktvariante ................... 0
M Lautsprecher ................. 1 %E Retrain ........................... 1 &Y Start-Profil ..................... 0
Q Meldungen .................... 0 %M Passwort-Modus ........... 0 Autobaud .............................. 1
V Text/Numerisch ............. 1 %R Rate-Change ................. 0 DEE-Baudrate ............... 19200
X Meldungsart .................. 4 &C M5-Option ..................... 2 Fernkonfig ............................. 0
\A MNP-Blocklaenge ......... 1 &D S1-Option ...................... 2 AT/V.25bis-Befehle ................ 0
\C MNP-Handshake ........... 3 &H Simuliert Hx ................... 0 Testtaste ................ Datentaste
\G Modem-Flusskontrolle .. 0 &I Connect-Meldung ......... 0 Rufannahme .......................... 1
\K Break-Handling ............. 3 &L Standleitung .................. 0 Fax-Speed ............................ 5
\L Block/Stream-Mode ...... 0 &M SyncBetrieb ................... 0 Fax-ECM ............................... 1
\N ECC-Modus .................. 3 &R M2-Option ..................... 1 Fax-Class .............................. 0
\Q DEE-Flusskontrolle ........ 2 &S M1-Option ..................... 1
OK
3.6 Activation of Control and Report Lines
AT&C(n) M5 Option
The modems activate the interface line M5/109 according to the
parameters set with the command AT&C.
command parameter/default description
AT&C(n) 0...2 / 2 M5 option
0 M5/109 is always active
1 M5/109 follows receive signal level
2 M5/109 is ON during transparent
modeand OFF during command mode
AT Commands