KE LOGEM 928, Operation Manual

Page: 83 / 200

83
Operation Manual V.34 - Modems, Version 07/97
AT
Chapter 3
3.5 Changing of Register Contents
ATS(n) = (x) Set Registers
The modem registers listed below may be changed:
reg. description values default
S0 count of rings 0-5 1
S2 ESCAPE character 0-255 43 (+)
S3 carriage return (CR) 0-255 13
S4 line feed (LF) 0-255 10
S5 backspace 0-255 8
S7 connect timeout 10-100 100 = 100s
S8 dial pause 1-30 2 = 2s
S10 carrier timeout 2-100 50 = 5s
S12 break sequence guard time 1-255 45 = 900 ms
S20 dial abort character 0-255 255
S26 S2-M2 delay time 0-255 4 = 40 ms
S37 inactivity timeout 0-255 0
S39 XON character 0-255 17 (CTRL-Q)
S40 XOFF character 0-255 19 (CTRL-S)
S50 transmission procedure 0-5, 20-23, 255
25-27, 30-37
40-52, 253-
255
S51 DTE interface rate 2-15, 20,255 255
S52 DTE baud rate 1-255 48(38400bps)
S54 function test button 0-5 1
S60 online phase data format 0-11 0
S61 command phase data format 0-11 0
S63 dial backup reswitching 6-255 6 = 60 s
S64 DBU swiching procedure 0-1 1
S65 DBU reswitching/hour 1-255 4
S66 DBU reswiching/day 1-255 16
S67 M3 function at DBU 0-1 1
S80 command interpreter 0-3 0
S81 dialing mode 0-1 0
S90 max. transm. rate fax operation 0-5 5
S91 ECM mode fax operation 0-1 1
S100 echo character (password mode) 0-255 42 (*)
S102 M3 function at password 0-1 0
AT Commands