KE LOGEM 928, Operation Manual

Page: 78 / 200

78 Operation Manual V.34 - Modems, Version 07/97
AT
Chapter 3
3.3.2 Storing and Displaying of Telephone Numbers
AT&Z(n)? Display Telephone Number
Displays the number stored with the command AT&Z(n).
AT&Z? Display All Telephone Numbers
Displays all stored telephone numbers.
AT&Z(n)=(x) Store Telephone Number
With the command AT&Z you can store max. 20 numbers (n = 0...19).
Example: AT&Z1 = 0511\67 47 390/KE-E (CR)
The parameters listed below are applicable with the ATD command:
parameter description
no parameter data button function “call“
P pulse dialing
T tone dialing
0 ... 9 dial digits
* special function, only for tone dialing
U disable V.8 calling sequency for dial up
# special function, only for tone dialing
> ground key activation for 255 ms
& and ! flash pulse, only for tone dialing
/Label short dial with label
, dial pause
- group separation character, not to be evaluated
SPACE group separation character, not to be evaluated
( ) group separation character, not to be evaluated
\ group separation character, not to be evaluated
AT Commands