KE LOGEM 928, Operation Manual

Page: 68 / 200

68 Operation Manual V.34 - Modems, Version 07/97
AT
Chapter 3
AT Commands
3.2 Command Description
A/ Repeat Last Command Line
The modem repeats the last command line that was typed. The command
A/ is not terminated with a carriage return (CR).
The command is very useful whenever a call was not successful as the
subscriber was ocupied. With the A/ command you can restart the
command line without typing it again.
ATE(n) Echo ON/OFF
The command ATE(n) defines if the modems transfer characters to the
DTE as an echo or if they do not send any characters during command
mode. If you type the command ATE(n) without a parameter the modems
set automatically the value 0. Any received characters are not returned to
the DTE as an echo.
command parameter/default description
ATE(n) 0, 1 / 1 character echo
n = 0 echo OFF
n = 1 echo ON
AT(Befehl)? Help Feature for AT Commands
With the command AT(Befehl)? [AT(Command)?] you can display the
current modem setting, a short description and the valid range of
parameters for the command.
Example:
AT\N?
1
ECC mode (0...5)
OK
AT&B Deactivate Command Phase
The command interpreter is deactivated with the command AT&B. After
typing the command any characters coming from the DTE are being ignored
as long as the modems have not established a connection. During the
connect phase the escape sequence (+++) is not being evaluated, remote
configuration is not possible. This command should only be used for leased
line applications. After saving with AT&B&W activation of the command
phase is only possible by loading a default setting.