KDS KDS-7XII, Instruction Manual

Page: 15 / 24

KDS-7XII Radio Remote Control System
-14-
in AUX channel setting, SW1 and SW2, control the signal of AUX channel when GEAR switch in
different position.

Press UP or DN to change channel index between "SW1" and "SW2".

Press INC or DEC to modify the value between "-100" to "+100", default value is +100 for
SW1 and -100 for SW2.
Figure 13 - Aux channel setting
6.9 Throttle Curve Setting
There are two throttle curves in K-7XII, one is for NORMAL mode, and the other is for IDLE
mode. Every curve has 5 points. Each point means the relation between signal and stick position
as Table 8.

Press UP or DN to change channel index between "N/1" to "N/5" and "I/1" to "I/5". "N/?" for
NORMAL mode and "I/?" for IDLE mode.

Press INC or DEC to modify the value between "0" to "+100".
Figure 14 - Throttle curve setting
Curve point index Stick position Default signal value
N/1 I/1 H/1 Stick at lowest position 0
N/2 I/2 H/2 Stick at 25% position +25
Curve point index Curve point value
Menu caption
Switch position Channel value
Menu caption