KDS-7XII Radio Remote Control System
-11-
Figure 7 - End point adjustment
Note: about K-7XII, the end point value in both directions of channel can be adjusted
independently, and “+” and “-” represent respectively both directions
6.3 Sub Trim Setting
Press UP or DN to change channel index from "CH1" to "CH7".
Press INC or DEC to modify the value between "-100" to "+100", default value is 0.
Figure 8 - Sub trim setting
6.4 Dual Rate Setting
DR switch control the dual rate of aileron, elevator and rudder. And the rate of aileron, elevator
and rudder can be set independency.
Press UP or DN to change channel index between "Aileron ", "Elevator" and "Rudder" as
Table 6.
Press INC or DEC to modify the value between "0" to "+120". Default value is 100 for DR
SW=0, 60 for DR SW=1.
Channel index
End point value
Menu caption
End point
rudder
Channel index
Sub trim value
Menu caption
Summary of Contents for KDS-7XII
Page 1: ......
