KDS KDS-7XII, Instruction Manual

Page: 17 / 24

KDS-7XII Radio Remote Control System
-16-
7 Aero Mode
A/P is AERO mode. In AERO mode, the LCD will display like Figure 17:
Figure 17 - Aero mode
In AERO mode, the corresponding content of each channel is shown in Table 9
Channel Control Description
1 AIL Aileron
2 ELE Elevator
3 THR Throttle
4 RUD Rudder
5 GER Gear, control by GEAR switch
6 FLP Flap, control by IDLE switch
7 AUX Aux, control by D/R switch
Table 9 – AERO channels list
There are 8 settings in AERO mode, see Table10 for details. To change settings, the operations are
the same as the operations in HELI mode.
Index Caption Description
1 REV Channel reverse setting
2 EPA End point adjustment
3 TRM Channel sub trim setting
4 D/R Dual rate setting
5 EXP Exponent setting
6 HLD Throttle hold setting
7 GER Gear setting
8 FLP Flap setting
Table 10 – AERO settings
8 V-tail Mode
V/P is V-tail mode. In this mode, the LCD will display like Figure 18:
Model status
Battery voltage
Mixture status
Throttle timer