KDS-7XII Radio Remote Control System
-17-
Figure 18 – V-tail mode
The channels and switches
are the
same as in AERO mode, see Table 9.
There are 9 settings in V-tail mode, see Table 11 for details. To change settings, the operations are
the
same as the operations in HELI mode.
Index
Caption
Description
1
REV
Channel reverse setting
2
EPA
End point adjustment
3
TRM
Channel sub trim setting
4
D/R
Dual rate setting
5
EXP
Exponent setting
6
HLD
Throttle hold setting
7
GER
Gear setting
8
FLP
Flap setting
9
MIX
V-tail Mix control setting
Table 11 - V-tail settings
8.1 V-tail Mix control Setting
There are four items in this setting:
E>2, E>4, R>2 and R>4
. The value is between -100 to 100.
The relationship between output signal and Mix control parameters is shown in Table 12.
Signal
Stick
CH2
CH4
Elevator stick
E>2
E>4
Rudder stick
R>2
R>4
Description
CH2=
Elevator
x(E>2)+
Rudder
x(R>2)
CH4=
Elevator
x(E>4)+
Rudder
x(R>4)
Table 12 - V-tail signal
Pressing UP or DN will change setting from
E>2
to
R>4
. Pressing INC or DEC will increase or
decrease the value. See Figure 19.
Model status
Battery voltage
Mixture status
Throttle timer
Summary of Contents for KDS-7XII
Page 1: ......