KDS KDS-7XII, Instruction Manual

Page: 14 / 24

KDS-7XII Radio Remote Control System
-13-
changed even if the throttle stick is changed. It is controlled by HOLD switch. When HOLD
switch to 1, the throttle signal is locked (holding status), when HOLD switch to 0, the throttle
signal is normal (change by throttle stick).

Press INC or DEC to modify the value between "-20" to "+20", default value is 0.
Figure 11 - Throttle holding setting
6.7 Gyro Sensitivity Adjusting
There are two sensitivities for gyro. The gyro signal is one of the two values decided by IDLE
switch (see Figure1). The sensitivity value can be set between -100~+100. When it is greater than
0, the gyro is in head-lock mode, when the value is less than or equal to 0, the gyro is in non-lock
mode; when the value is equal to 0, the gyro does not work.

Press UP or DN to change channel index between "NOR" and "IDL".

Press INC or DEC to modify the value between "-100" to "+100", default is +100 for NOR
and -100 for IDL.
Figure 12 - Gyro sensitivity setting
6.8 Aux Channel Setting
When in HELI mode, the GEAR switch controls channel 7, the AUX channel. There are two items
Throttle hold value
Menu caption
Switch position Gyro sensitivity
Menu caption