manualshive.com logo in svg

KBR multimax D6-5 Series, User Manual, Page: 80 / 108

Share
Download
KBR multimax D6-5 Series User Manual Download Page 80

V5.00

25832_EDEBD

A0289-5020-1_EN

80

Technical Data

12.3 

Serial interface

Operating modes and interface configuration RS 485 bus operation

The multimax’s RS485 interface is designed for operation on the 

KBR eBus

. You can 

operate one or several multimax D6-xxx-5 devices together on the 

KBR eBus

 across great 

distances. Typically, the bus is connected to the computer via the 

KBR eBus TCP

 gateway. 

With the according Windows® Software, all bus devices can be parameterized and visual-
ized. We will be glad to provide information on which other devices you can connect to 
the 

KBR eBus

 as well as on the functionality of our software.

Information on the structure and technical parameters of the 

KBR eBus

 can be gathered 

from our installation guide for the 

KBR eBus

. You are welcome to request this installation 

guide from us at any time.

12.4  

Protective Measures – Overvoltage and Lightning Protection

To protect your purchased high-quality devices from damage, we strongly recommend 
that you take overvoltage protection measures. Protect control voltage inputs, pulse and 
bus lines.

Summary of Contents for multimax D6-5 Series













































































































Reviews:

No comments