manualshive.com logo in svg

KBR multimax D6-5 Series, User Manual, Page: 58 / 108

Share
Download
KBR multimax D6-5 Series User Manual Download Page 58

V5.00

25832_EDEBD

A0289-5020-1_EN

58

Display parameters

10.7 

Display parameters

In the 

Display parameters

 area, you can change the LED display settings.

1.

 From the 

main menu, select Display parameters > Enter

.

2. 

Begin programming by selecting 

Edit

.

Display  

parameters

Programming

Explanation

Contrast

Numeric value in %

Defines the text contrast in relation to the 
background.

Brightness

Numeric value in %

Defines the brightness of the background 
lighting.

inverse

On/Off

Defines whether dark text is displayed on a 
light background or light text is displayed on a 
dark background.

Language

Choice  
between 

German

 and 

English

Defines the display language.

Dimming 

brightness

Numeric value in 

%

Decreases the display brightness to the given 
percentage.

Dimming 

time

Numeric value in 

min

Decreases the display brightness as per the 
given time to the value set under 

Dimming 

brightness

. This makes sense if you want to 

work on the device for a while and then dim 
the display to save energy. After dimming, the 
display returns to its original brightness once a 
key is pressed.

Version

Number/letter combi-
nation

Information on the display version.

3. 

T est the display for pixel errors with 

test

.

4.

   Press 

OK

 if the horizontal lines are correctly displayed.

5. 

 Press 

OK

 if the vertical lines are correctly displayed.

6.

  Test the function keys by following the instructions on the device. 

After pressing all function keys, you are returned to the menu.

Summary of Contents for multimax D6-5 Series













































































































Reviews:

No comments