manualshive.com logo in svg

KBR multimax D6-5 Series, User Manual, Page: 55 / 108

Share
Download
KBR multimax D6-5 Series User Manual Download Page 55

V5.00

25832_EDEBD

A0289-5020-1_EN

55

Timer programs:

 

 

NOTE

The timer programs have a priority order corresponding to their ID no., whereby ID 01 is 
the most important timer program, then ID 02, etc.  
 
When carrying out an action, timer programs (internal or external) always have priority 
over bus switching, digital input (manual switching) and device programming.

The device can manage and process up to 10 timer programs. The timer programs are 
divided into daily programs and weekly programs.

Daily programs:

One or more days can be selected on which the timer program runs. If the time of the 
final action is before that of the start action or at the same time (e.g. 04:00 am to 04:00 
am), the end time will not be reached until the next day (irrespective of the day).

If the time is set to 00:00 am to 23:59 pm, the timer program runs for 24 hours on the 
same day.

Weekly programs:

The start and end day can be selected. The started function is active until the end day and 
is repeated in a weekly cycle. If the end day is before the start day (e.g. start day is Friday, 
end day is Monday), then the program runs, including over the weekend.

 

 

NOTE

For all daily and weekly programs, the month in which the program is to be active can 
also be selected. For example, January, February and December can be chosen, meaning 
that March to November are excluded.

Summary of Contents for multimax D6-5 Series













































































































Reviews:

No comments