manualshive.com logo in svg

KBR multimax D6-5 Series, User Manual, Page: 49 / 108

Share
Download
KBR multimax D6-5 Series User Manual Download Page 49

V5.00

25832_EDEBD

A0289-5020-1_EN

49

Meter inputs

10.1 

Meter inputs

In the 

Meter inputs

 area, you can set and configure inputs for meters.

1.

 From the 

main menu, select Meter inputs > Enter

.

2.

 Begin programming by selecting 

Edit

.

Meter inputs

Programming

Explanation

Input 1, 2, etc.

+/- I...

A + before the meter input adds the meter 
values to the total power and a - subtracts 
them from the total power, e.g. when a meter 
is measurement a self-generated energy 
supply.

Recording the operate values without sum offsetting:

Is it now possible to record a meter input (load profile memory, energy meters) without 
the value being added to or subtracted from the instantaneous power. This can be done 
by selecting “/” for the relevant meter input instead of “+” or “-”. This means that the power 
of a photovoltaic device can be recorded without this power being included in the total 
power under consideration.

3.

  You can display the current values of each meter using 

Pact

. This is only possible here.

4.

 Program meter pulse monitoring using 

Para

.

Input   4          +I04

¡

EDIT

Input   2          +I02
Input   3          +I03

Input   1          +I01

Input   5          /I05

counter inputs

Pact

Para

Summary of Contents for multimax D6-5 Series













































































































Reviews:

No comments