KBR multimax D6-5 Series, User Manual, Page: 51 / 108

V5.00
25832_EDEBD
A0289-5020-1_EN
51
Module Management
E.g. when defining as a pulse counter
Para (...)
Input
Programming Explanation
Log.
address
I…
Fixed logical address.
inverse On/Off
Determines whether the input reacts to a positive
or negative pulse.
t Pact -> 0 Numeric value in
sec
Determines the time before the power drops to 0.
Imp. val Numeric value in
I/kW, MW, m
3
Pulse value as per energy supplier.
I/V prim/sec
Numeric value in
A/V
Transformer ratio
Current/voltage
E.g. when defining as a relay output
Para (...)
outputs
Programming Explanation
Log.
address
O…
Configurable lines can be assigned to a terminal.
The terminal is determined by hardware
inverse On/Off Determines whether the relay reacts to a positive
or negative pulse.
Switch
Group
Numeric value in
sec
Assigns the relay to a switch group (switches inde-
pendently of the multimax)
When defining as a limit signaling relay, the following additional parameters are
available:
t-delay: Delay until relay is switched
t-drop: Hold time beyond the duration of the limit violation