EXTERNAL PLAYERS
A line-in connector is available in the head area of the
bed, on the right-hand side, so that the studio client
can plug in his/her own equipment, e. g. MP3 player,
iPod, etc.
(fi gure: line in connector)
. Use a standard 3.5 mm
jack cable (included if the music option has been
ordered). If an external player is plugged into this
connector, the system switches over automatically
and plays the music of the personal player. This
assumes that you have selected the “Studio” option
of the menu item “Audio” in the service menu I.
A level adjustment is performed using the volume
control of the panel of the collarium, and the volume
control of the external player.
Figure: line in connector
The tanning unit can only be operated with audio
sources if you have purchased the optionally avail-
able audio package.
For further information, please refer to the chapters
“Connections” and “Operation in service mode”.
Connecting the external timer
Connect the external timer (coin box, studio control)
according to the instructions supplied with the timer.
The following diagram shows the wiring requirements
with regard to the timer. The door contact is required if
you have opted for the booth-scenting feature.
Figure: connecting the external timer
PE
L
1
2
N
3
4
5
Remote st
art
Enable
Wiring on the coin box/external timer
6
Door cont
act
Connecting the chan. selection
The following diagrams show the wiring of the
channel selection on the audio equipment’s side, for
pulse coding and for BCD coding.
Figure: pulse
Wiring on the audio system of the studio
PE
1
2
3
4
5
V
olume +
V
olume -
ch. selection -
ch. sel
Control volt
age
puls-coding
Figure: BCD
Wiring on the audio system of the studio
PE
1
2
3
4
5
Control volt
age
BCD-coding
Channel selection
Channel selection
CHANNEL
BCD CODING
1
0
0
2
1
0
3
0
1
4
1
1
O p e r a t i n g I n s t r u c t i o n s
|
mon amie
11
