Functions C‘M‘A‘
Depending on the confi guration of your system, the
menu item
PIN II/CMA
allows you to switch on or
off certain functions.
1. Invoke the
PIN II
menu and enter the PIN.
2. Set the desired value by pressing the plus and
minus buttons of the corresponding letter.
3. Save the settings by pressing START, press STOP
to leave the menu.
C (Channel) is deactivated if only external channel
selection with exactly one channel is available as
audio system for the unit. The channel-selection
symbol is not displayed.
M (Music) is deactivated if there is no audio system
available. No symbols regarding the audio system
are displayed.
A (Air-conditioning unit) is not displayed if the tanning
system is not equipped with an air-conditioning unit.
No symbols regarding air-conditioning are displayed.
ACS funktions
Three submenus for fan control and air-conditioning
are located under the menu item
PIN II/ACS
:
PRESETTING AIR-CONDITIONING UNIT (AIRCON)
Use the menu item AIRCON to specify if the air-con-
ditioning unit should start automatically at the begin-
ning of the tanning session (ON) or if it must be acti-
vated manually by the studio customer (OFF).
1. Invoke the PIN II menu and enter the PIN.
2. Press START to invoke the menu item ACS.
3. Select AIRCON by pressing 5 (plus button) or 0
(minus button).
4. Activate the function by pressing 4 (plus button)
or deactivate it by pressing 9 (minus button).
5. Use the START button to save the settings and
press STOP to exit the menu.
PRESETTING BODY FAN
Under the menu item
ACS/Bodyvent
, you can
stipulate whether the body fan will be controlled au-
tomatically by means of ACS or whether this can only
be controlled manually.
ON = automatic
OFF = manual
1. Invoke the
PIN II
menu and enter the PIN.
2. Press START to invoke the menu item
ACS
.
3. Select
Bodyvent
by pressing 5 (plus button) or
0 (minus button).
4. Activate the function by pressing 4 (plus button)
or deactivate it by pressing 9 (minus button).
5. Use the START button to save the settings and
press STOP to exit the menu.
ADJUST THE SPEED OF THE EXHAUST AIR FAN
Under the menu item OFFSET, you can stipulate
whether the exhaust air fan should operate at a high-
er speed. An OFFSET of 00-99% can be set in steps
of 10 %. This measure may become necessary in the
case of poor venting. Note that such modifi cations
must only be carried out by service staf
f!
1. Invoke the
PIN II
menu and enter the PIN.
2. Press START to invoke the menu item
ACS
.
3. Select
OFFSET
by pressing 5 (plus button) or 0
(minus button).
4. Press 4 (plus button) to increase the value or 9
(minus button) to decrease the value.
5. Save the settings by pressing START and exit the
menu by pressing the STOP button.
Settings on service level II
O p e r a t i n g I n s t r u c t i o n s
|
mon amie
27
