Information about operation
Select the menu item
Operation-Info
to display
the working hours of the device (
WORK
), the
operating hours of the UV tubes (T.UV) as well as the
operating hours of the collagen tubes (T.Co)
Displaying the operating hours
of the collarium
The menu item
xxxxxh WORK
is used to display
the operating hours of the device.
1. Invoke the display of the operating hours (xxxxxh
WORK)
by pressing 0 (minus button) or 5 (plus
button).
2. Press STOP to exit the menu.
Displaying the operating hours
of the tubes
The menu item
xxxxxh T.UV
is used to display
the operating hours of the UV tubes. The menu item
xxxxxh T.Co
is used to display the operating hours
of the collagen tubes.
1. Invoke the display of the operating hours of
the tubes (xxxxxh
TUBE)
by pressing 0 (minus
button) or 5 (plus button).
2. Press STOP to exit the menu.
Setting the audio music system
STANDARD AUDIO SOURCE
The menu item
AUDIO/PRESEL
is used to deter-
mine which audio source is selected as the default
source when the tanning session is started. Only
sources that are activated under
WPS
can be se-
lected.
1. Invoke the
AUDIO
menu.
2. Press START to invoke the submenu and press 5
(plus button) or 0 (minus button) to select
WPS
.
3. Preselect the desired source by pressing 4 (plus
button) or 9 (minus button).
4. Press START to save the settings and STOP to
exit the menu.
CHANNEL-SELECTION PROCEDURE
The external channel-selection procedure is defi ned
via the menu item
AUDIO/CH
.
1. Invoke the
AUDIO
menu.
2. Invoke the submenu by pressing START and
select CH by pressing 5 (plus button) or 0 (minus
button).
3. Select PULS by pressing 4 (plus button) or BCD
by pressing 9 (minus button).
4. Press the START button to save the settings and
leave the menu by pressing STOP.
MUSIC ON/OFF IN STANDBY MODE
Use the menu item
AUDIO/NONSTOP
to switch the
music on or off in standby mode.
1. Invoke the
AUDIO
menu.
2. Press the START button to invoke the submenu
and then press 5 (plus button) or 0 (minus button)
to select
NONSTOP
.
3. Switch the option on or off by pressing 4 (plus
button) or 9 (minus button).
4. Save the settings by pressing START; press STOP
to leave the menu.
VOLUME OF MON AMIE TERMINAL
Select the menu item
AUDIO/VOL.TER
in order to
set the volume of the terminal unit. The maximum
possible volume of this unit is 100 %.
1. Invoke the
AUDIO
menu.
2. Press START to open the submenu and select
VOL.TER
by pressing 5 (plus button) or 0 (minus
button).
3. Set the desired percentage using 4 (plus button)
or 9 (minus button).
Settings on service level I
O p e r a t i n g I n s t r u c t i o n s
|
mon amie
24
