Figure 31.1 Screw of the canopy pane
Figure 31.2 Screw of the side pane
BED PANE
Please refer to the following table for the cleaning of
the bed pane. The electronics unit underneath the
bed must absolutely not get in contact with any liq-
uid. Therefore, use a slightly damp microfi bre cloth to
clean the underside of the bed pane and the interior
of the bed section. Also use this cloth to clean the
shoulder tanner. Apply megaClean as cleaning agent
(spray onto the cloth).
Procedure
Fig.
1
Lock the canopy in place.
2
Undo the two screws on the right-hand
and left-hand side of the bed pane.
31.3
3
Fold the bed pane up and use the
supplied hooks to attach it to the
canopy.
31.4
4
Use a microfi bre cloth and megaClean
to clean the underside of the bed
pane.
5
If the bed section is equipped with
a ducting pane, the latter can be
removed
for
cleaning
purposes.
Carefully re-place the ducting pane to
ensure the proper cooling of the bed
pane.
6
Clean the upper surface of the bed pane
and fi x it again using the two screws.
Figure 31.3. Screw of the bed pane
Figure 31.4 Hook for attachment of bed pane
O p e r a t i n g I n s t r u c t i o n s
|
mon amie
31
