mon amie skin sensor
(terminal)
SENSOR-TEST
Perform a test of the melanin sensor. The values read
by the sensor can be read directly.
1. Invoke the
PIN II
menu.
2. Select
easyCare
by pressing 5 (plus button) or
0 (minus button).
3. Press START to go to the submenu and select
TEST
by pressing 5 (plus button) or 0 (minus
button).
4. Press the sensor onto the skin in order to start
the test.
5. Press STOP to leave the menu.
Querying software info
Select the menu item
PIN II/VERSION
to display
the name and number of the installed software
version. This information is also displayed for approx.
2 seconds after the unit has been switched on.
1. Invoke the
PIN II
menu and enter the PIN.
2. Press 5 (plus button) or 0 (minus button) to select
VERSION
.
3. Press START to display the version information.
Download information
The menu items
PIN II/la.Download
and
PIN
II/fi.Download
indicate time and date of the latest
(
la.Download)
or of the fi rst (
fi.Download)
software download.
1. Invoke the
PIN II
menu and enter the PIN.
2. Select
la.Download
or
fi.Download
by
pressing 5 (plus button) or 0 (minus button).
3. Press the START button to display the
corresponding information.
Setting the operating hours of
the tubes
The operating hours of the tubes must be reset when
replacing the control board or adjusted accordingly
when utilizing used tubes!
Go to the menu item
PIN II/xxxxxh T.UV
if you
want to enter the operating hours of the UV tubes. Go
to the menu item
PIN II/xxxxxh T.Co
if you want
to enter the operating hours of the collagen tubes.
1. Invoke the
PIN II
menu and enter the PIN.
2. Select
T.Co
or
T.UV
by pressing 5 (plus button) or
0 (minus button).
3. Press START to invoke the selected menu item.
4. Enter the desired value by pressing 5 (plus button)
and 0 (minus button).
5. Save the settings by pressing START and exit the
menu using the STOP button.
O p e r a t i n g I n s t r u c t i o n s
|
mon amie
28
