4. Press the START button to save the settings and
then press STOP to exit the menu.
MUSIC VOLUME IN STANDBY MODE
The menu item
AUDIO/VOL.COOL
is used in
order to determine the volume of the music during
a standby mode. The maximum possible volume of
the unit is at 100 %.
1. Invoke the AUDIO menu.
2. Use START to invoke the submenu and press 5
(plus button) or 0 (minus button) to select VOL.
COOL.
3. Set the desired percentage by pressing 4 (plus
button) or 9 (minus button).
4. Press START to save the settings and STOP to
exit the menu
MUSIC VOLUME IN TANNING MODE
The menu item
AUDIO/VOL.HOT
is used in order to
determine the volume of the music during a tanning
session. The maximum possible volume of the unit
is at 100 %.
1. Invoke the AUDIO menu.
2. Use START to invoke the submenu and press 5
(plus button) or 0 (minus button) to select VOL.
HOT.
3. Set the desired percentage by pressing 4 (plus
button) or 9 (minus button).
4. Press START to save the settings and STOP to
exit the menu.
ACTIVATING/DEACTIVATING AUDIO SOURCES
The menu item
AUDIO/WPS
is used to determine
which audio sources are to be made available to the
salon client. W=Wellness, P=Pop, S=Studio Music.
In the case of a top mark (apostrophe:
), the cor-
responding source is activated while it is deactivated
if a bottom mark is shown (comma: ). All activated
sources are listed under
AUDIO/PRESEL
.
1. Invoke the
AUDIO
menu.
2. Use START to invoke the submenu and 5 (plus
button) or 0 (minus button) to select
PRESEL
.
Set the desired value by using the plus and minus
buttons to the corresponding letters.
3. Press START to save the settings and leave the
menu by pressing STOP.
Entering PIN II
By entering your PIN II here, you will be admitted to the next
service level. (See
Settings on service level II).
Setting date and time
The current time and date are set within the menu
item
TIME/DATE
. This information is required for
the proper execution of the timer function for the
decorative lighting. Date and time are displayed for
approx. 2 seconds after the unit has been turned on.
1. Invoke the
TIME/DATE
menu.
2. Choose the time setting with START and set the
time by pressing the plus or minus buttons to the
corresponding number.
3. Choose the date setting using 5 (plus button) or
0 (minus button) and set the date by pressing
the plus or minus buttons to the corresponding
number. The day of the week is determined
automatically.
4. Save the settings using START and press STOP
to exit the menu.
Setting the timer function of
the decorative lighting
The menu item
TIME/DATE
allows you to enter two
pairs of times per day at which the decorative lighting
is automatically switched on and off (e.g. Monday at
10:00 h on, at 12:00 h off, at 13.00 h on again, and
at 22:00 h off, Tuesday at 11:00 h on, at 22:00 h off,
etc.). If a switching time is not required, it can be
deleted by pressing 1.
1. Invoke the
TIMER
menu.
2. Select the days of the week with START and then
press 5 (plus button) or 0 (minus button) to set the
desired day.
O p e r a t i n g I n s t r u c t i o n s
|
mon amie
25
