WES2HT User Manual
Manual-WES2HT-Rev1407-1
Copyright © KBC Networks 2013
Page 29 of 142
www.kbcnetworks.com
Pin out for color codes 568-A and 568-B:
568-A
568-B
1- Green/White
1- Orange/White
2- Solid Green
2- Solid Orange
3- Orange/White
3- Green/White
4- Solid Blue
4- Solid Blue
5- Blue/White
5- Blue/White
6- Solid Orange
6- Solid Green
7- Brown/White
7- Brown/White
8- Solid Brown
8- Solid Brown
A cable configured with the 568-A color code on one end and the 568-B color code on
the other end is an Ethernet standard crossover cable.
8.3 Disconnecting the Cable from the External LAN
Port.
When the system must be removed from its mounted position for servicing and the
Ethernet cable must be removed from the RJ45 port, follow these steps:
1.
Loosen the strain relief (see warning note above in section 8.1, step 4).
2.
Using a small flathead screw driver (or something flat and long, or even the long
flat portion of a pen cap), depress the RJ45 tab that secures the connector into
the port. Do not attempt to remove the cable without depressing in the RJ45
connector tab or the port will get pulled loose from the housing.
3.
At this point the cable can be removed from the RJ45 port.
