WES2HT User Manual
Manual-WES2HT-Rev1407-1
Copyright © KBC Networks 2013
Page 16 of 142
www.kbcnetworks.com
2.
Typical Configurations
The WES2HT units are available to work in the following configurations:
Point-to-point
Point-to-multipoint
Relay
Wi-Fi Access Point
Mixed systems
o
WESII / WES2HT
o
WESII or WES2HT / MESH2HT
2.1
Point-to-Point
2.1.1 Non-PoE WES2HT
Note:
The drawings above and below show the parts that come in a standard WES2HT-
KT (i.e., WES2HT Host and Client and accessories). The power supplies and power
injectors in the kit will only power the WES2HT and will not power the camera or any
other device other than the WES2HT units.
2.1.2 PoE WES2HT
Note:
The system is capable of being powered by PoE or via the passive power injector
(PIM) and power supply included with the product. In essence, there is only one version
of the system but it can be powered via the PIM if there is no PoE switch available or via
an IEEE 802.3af PSE device.
WES2HT Host
WES2HT Client
WES2HT Client
WES2HT Host
