KBC WES2HT Series User Manual Download Page 23

Page: 23 / 142

WES2HT User Manual

Manual-WES2HT-Rev1407-1

Page 22 of 142

www.kbcnetworks.com

Point-to-point Kits

There are a number of WES2HT point-to-point kits that are available, details are below:

Part number

Description

Contents

WES2HT-KT

5GHz, point-to-point 17dBi kit 1 x 5GHz WES2HT-AA-Cx 17dBi Single-

point Host; 1 x 5 GHz WES2HT-AC-Cx
17dBi Client; 2 x Gigabit LAN power
injectors; 2 x 24VDC Power Supplies; 2 x
pole/wall mounting assemblies.

WES2HT-KT-9

5GHz, point-to-point 9dBi kit

1 x 5GHz WES2HT-AA-Bx 9dBi Single-
point Host; 1 x 5 GHz WES2HT-AC-Bx
9dBi Client; 2 x Gigabit LAN power
injectors; 2 x 24VDC Power Supplies; 2 x
pole/wall mounting assemblies

WES2HT-KT-49

4.9GHz, point-to-point kit

Included in the WES2HT-KT-49 is all that
is included in the WES2HT-KT but the
radios are 4.9GHz as opposed to 5GHz.

This system operates on the Public
Safety band and is approved by
FCC/IC to be used by first response
only.

It remains the responsibility of the

user to abide by FCC or IC requirements.

WES2HT-KT-P8

5GHz, point-to-point kit with
8 port PoE+ Gig switch &
narrow temperature range
PSU

Included in the WES2HT-KT-P8 is all that
is included in the WES2HT-KT as well as:
1 x ESUG8P-D Gigabit 1 x DRP-
480-48 Power Supply

WES2HT-KT-P8T

5GHz, point-to-point kit with
8 port PoE+ Gig switch &
extended temperature range
PSU

Included in the WES2HT-KT-P8T is all that
is included in the WES2HT-KT as well as:
1 x ESUG8P-D Gigabit 1 x SDR-
480-48 Power Supply

Note:

In the model numbers referenced above “x” is a place holder for the actual

indicator used in the complete model number to identify the global type of power supply
included in the kit.

Summary of Contents for WES2HT Series















































































































































Search results

Summary of Contents for WES2HT Series

Reviews:

Related manuals for WES2HT Series

Brands by name

Popular brands

KBC WES2HT Series, User Manual

Search results

Summary of Contents for WES2HT Series

Reviews:

Related manuals for WES2HT Series

Brands by name

Popular brands