Note
KaVo only guarantees that its products will function properly when the care
products used are those listed as accessories, as they were tested for
proper use on our products.
7.5.1 C
Care products and systems - Servicing: Care with KaVo Spray
KaVo recommends servicing the product after each time it is used, i.e. after
each automatic cleaning and before each sterilisation.
▶
Remove cutter or grinder.
▶
Cover the product with the CLEANpac bag.
▶
Place the product on the cannula and press the spray button for one
second.
Setup methods according to DIN EN ISO 17664
47
S
Servicing of the clamping chuck
KaVo recommends cleaning and servicing the chuck system once a week.
▶
Remove the cutter or grinder, place the spray nipple tip in the opening
and spray.
▶
Carry out the servicing according to the instructions in the section,
"Care with KaVo Spray".
Setup methods according to DIN EN ISO 17664
48
77.5.2 C
Care products and systems - Servicing: Servicing with KaVo
QUATTROcare
Cleaning and care unit with expansion pressure for effective cleaning and
care.
KaVo recommends servicing the product after each time it is used, i.e. after
each automatic cleaning and before each sterilisation.
▶
Remove cutter or grinder.
▶
Service the product.
Setup methods according to DIN EN ISO 17664
49
C
Chuck care
KaVo recommends cleaning and servicing the chuck system once a week.
See also: Instructions for use K
KaVo QUATTROcare
▶
Remove the cutter or grinder, place the spray nipple tip in the opening
and spray.
▶
Subsequently treat with the care products and care systems specified.
See also: Care with KaVo QUATTROcare
Setup methods according to DIN EN ISO 17664
50
