33 P
Product description
INTRAmatic contra-angle handpiece 80 ES,M
Mat. no. 1.004.4375
Product description
15
33.1 P
Purpose – Proper use
Purpose:
This medical device is
▪ Only intended for dental treatment. Any other type of use or alteration
to the product is impermissible and can be hazardous. The medical
device is intended for the following uses: Removal of carious material,
cavities and crown preparations, removal of fillings, processing of tooth
and restoration surfaces.
▪ A medical device according to relevant national statutory regulations.
Product description
16
P
Proper use:
According to these regulations, this medical device may only be used for
the described application by a knowledgeable user. The following must be
observed:
▪ the applicable health and safety regulations
▪ the applicable accident prevention regulations
▪ these Instructions for use
According to these regulations, the user is required to:
▪ only use equipment that is operating correctly,
▪ use the equipment for the proper purpose,
▪ protect him or herself, the patient and third parties from danger, and
▪ avoid contamination from the product..
Product description
17
33.2 TTechnical data
Drive speed
max. 40,000 rpm
Speed transmission
1:1
ID
1 blue ring
Pushbutton chuck
1.6 dia.
Milling cutters or grinders
ISO 1797-1 type 3
The contra-angle handpiece can be mounted on all INTRAmatic motors,
and motors with a connection in accordance with ISO 3964 / DIN 13940.
Product description
18
