WARNING
Use of unauthorised tools.
Injury to the patient or damage to the medical device.
▶ Observe manufacturer instructions and use the tool properly.
▶ Only use tools that do not deviate from the specified data.
CAUTION
Injury from using worn tools.
Tools can fall out during treatment and harm the patient.
▶ Never use tools with worn shafts.
▶ Follow the instructions for use of the tool.
Operation
27
CAUTION
Injury hazard from tools.
Infections or cuts.
▶ Wear gloves or fingerstalls.
▶
Press the push button firmly with your thumb and simultaneously insert
the tool until it hits the stop.
▶
Check that the cutter or grinder is securely attached by pulling on it.
Operation
28
55.4 R
Removing the milling tool or diamond grinder
CAUTION
Hazard from rotating tools.
Laceration.
▶ Do not carelessly contact rotating tools.
CAUTION
Actuation of the pushbutton chuck while the tool is rotating.
Injury.
Damage to the chucking system.
▶ Do not press the pushbutton while the tool is rotating!
Operation
29
▶
After the tool has stopped rotating, forcefully press the pushbutton with
your thumb and simultaneously remove the tool.
DANGER
Hazard from defective checking system.
The tool can fall out and cause injury.
▶ Pull on the tool to check if the chucking system is functioning properly
and that the tool is firmly clamped. Wear gloves or a thimble to check,
insert, or remove the bits to prevent injury and infection.
Operation
30
