-
5
1 Dry foam station
2 Display of control (in control cabinet)
3 Display of control
Only for SB MB standard
4 Control board
5 Main switch
6 Dosing pump, dry foam station
7 Hot air blower
8 Dosing pumps
9 Frost protection with lost water (option),
installation site 2
10 Frost protection with lost water (option),
installation site 1
11 Emergency frost protection (option)
12 Rim cleaner (option)
13 Heat exchanger washing station heater
14 Head of base exchanger
15 Blending device (option)
1 Pressure switch air
2 Manometer
3 Compressed air connection for service
work
4 Pressure reducer
Set pressure reducer to 0.4...0.5 MPa
(4...5 bar).
1 Dosing pump high pressure wash (DP 1)
2 Dosing pump hot wax (DP 2)
3 Dosing pump top care (DP 3)
4 Dosing pump optional (DP 4), for addi-
tional programmes
The dosing pumps dose the washing water
with the detergents in accordance with the
wash programme and the equipment of the
system.
Note:
The dosage amount is optimally set by the
fitter when the system is assembled. Gen-
erally no reset is necessary.
Fine adjustments are made on the control
(see Settings/Control). The standard set-
ting of the dosing pumps remains un-
changed.
Settings
Main switch
Position
1
Plant is working.
Frost protection (option) is ac-
tive.
0
Entire system turned off (frost
protection also).
Adjust compressor
Setting dosing pumps
7
EN
Summary of Contents for SB MB
