-
12
When the "OK" key is pressed, the circula-
tion pump activates frost protection for 3
minutes.
If the "OK" key is pressed again prior to the
time elapse, the function is terminated.
When the "OK" key is pressed, the washing
station heater is activated for 3 minutes.
If the "OK" key is pressed again prior to the
time elapse, the function is terminated.
When the "OK" key is pressed, the foam
hose heater is activated for 3 minutes.
If the "OK" key is pressed again prior to the
time elapse, the function is terminated.
In normal operating mode, press the
"OK" key on the control longer than 2
seconds.
Press the LEFT button.
Press the RIGHT button three times.
Press the OK button.
Note:
Upon the initial start-up, the password is
"1111“. For security reasons, we recom-
mend changing the password during the
first use (see "Changing password" at the
end of the chapter).
Use the LEFT and RIGHT buttons to
select the blinking location of the pass-
word.
Confirm your entry using the "OK" key.
Set the other characters of the pass-
word in the same fashion.
Press the "OK" key for more than 1 sec-
ond to save the password.
Select the menu item with the buttons
LEFT and RIGHT.
Total sales since start-up of the washing
system.
Sales per washing station since start-up of
the washing system.
Total sales since the the beginning of the
day (0:00 Uhr).
Sales per washing station since the the be-
ginning of the day (0:00 Uhr).
Sales from the manually increased wash-
ing units per washing station (see "Manual
interventions").
Press the "OK" key to change the pass-
word.
YES: The daily storage on an USB flash
drive contains the sales data.
NO: The daily storage does not contain any
sales data.
Note:
Press "ESC" to cancel the change of the
password.
Upon the initial start-up, the password is
"1111“. For security reasons, we recom-
mend changing the password upon the first
use.
For security reasons, the password may
only be changed by the operator.
Use the LEFT and RIGHT buttons to
select the blinking location of the pass-
word.
Confirm your entry using the "OK" key.
Set the other characters of the pass-
word in the same fashion.
Press the "OK" key for more than 1 sec-
ond to save the password.
Reenter the password as described
above to confirm.
The successful change of the password will
be confirmed.
The anit freeze equipment contains:
– Recirculation blower
– Hot air blower
– Frost protection circuit or frost protec-
tion without lost water
– Washing station heater
– Emergency frost protection
– Heating cartridge in the oil tank
몇
WARNING
Risk of accident due to ice formation. In
case of ice formation the plant must be
closed off to prevent ice-related accidents.
Note:
The following functions are guaranteed:
– Unrestricted washing with the high-
pressure spray lance up to -15°C.
For systems with 4 washing stations it is
recommended to lock one washing sta-
tion at temperatures below -10 °C (for
systems with 4 high-pressure modules
type 908 already at a warmer tempera-
ture).
– Restricted washing operations using
washing brush at temperatures sub-
zero temperatures.
During restricted washing, all washing
brushes must be checked for ice-forma-
tion at regular intervals. Foam wash
with frozen washing brushes can dam-
age the vehicle. Take the following
steps if the washing brushes are frozen:
– The system is frost-safe up to -20°C.
The device must be shut down at tem-
peratures below -20°C in accordance
with the instructions in "Shutdown in
case of frost".
Sales indicator
Changing the password
Frost protection
14
EN
Summary of Contents for SB MB
