Kärcher MIC 84, User Manual

Page: 22 / 228

-
4
1 OFF: Ignition off
2 ON: Ignition on
3 GL: Pre-heat
4 ST: Start motor
Quick couplings 1 and 2 are standard
equipment on all machines.
Quick coupling 3 (option) is connected to
the lift cylinders via a T-piece and is used
while the front lift is deactivated, e.g. to lift
a front loader.
Front right quick couplings
Quick coupling 4 is standard equipment on
all machines.
Rear quick couplings
The main switch is located on the front side
of the rear machine portion.
Main switch, turned off position

The main switch must be turned on to
operate the machine. If the machine is
shut off and not started back up imme-
diately, switch the main switch off and
remove it.
The machine is fitted with a display or oper-
ating panel:
– The display and the indicator lamps are
located in the interior.
The outer ring displays the motor speed
up to 2,000 rpm/min, the inside ring is
the odometer, it displays a max. speed
of 40 km/h.
– The outer area includes buttons and
keys for setup functions.
Operating panel/display
몇 WARNING
Changes to the setup can influence the en-
tire machine and become traffic hazard.
Therefore: Only perform safety-relevant
adjustments for calibration after having
consulted customer service.
 Press the OK button when the machine
is running.
 Press buttons 1-7 to proceed through
the menu.
 Press the ESC key during navigation to
return to the previous menu.
The multi-function lever is equipped with a
switch to select the travel direction.

FORWARD: Switch to the front, the
FORWARD travel direction is activated
and the drive direction indicator (F)
lights up on the display.
 REVERSE: Switch to the rear, the RE-
VERSE travel direction is activated and
the drive direction indicator (R) lights up
on the display.
 NEUTRAL: The switch position is in the
centre, (N) will light up on the display.
Ignition
Front hydraulic connection
Rear hydraulic connection
Main switch
OFF
ON
GL
ST
Operations
Operating panel/display
Feed volume, front work hy-
draulics
Note : The feed volume is ad-
justed via potentiometer B.
Feed volume, rear work hy-
draulics
Note : The feed volume is ad-
justed via potentiometer C.
Operating hour counter
Tank indicator
Travel direction indicator: For-
ward (F), reverse (R) or neu-
tral (N)
Slow transport range
Fast transport range
Work range 1 (cruise control)
Work range 2 (limit load con-
trol)
Warning signals
The warning indicators only illuminate
when important information needs to be
displayed.
Cool water temperature
Temperature of hydraulic oil
Travel direction indicator
Driving light (dipped head-
lights)
Battery control display
Parking brake
Service display: lights up if the
respective service work needs
to be performed
Oil pressure display
Filter: lights up if filter 1 or filter
2 is obstructed
Setup menu
Driving direction selector switch
22 EN