![background image](http://html1.mh-extra.com/html/karcher/hd-30-6/hd-30-6_user-manual_4110514018.webp)
-
7
DANGER
Risk of electric shock.
Work on electrical plant only to be carried
out by qualified and authorised electricians.
Switch the system to voltage-free while
working on it; switch the system to "0" on
the emergency stop switch and secure it
from being turned on inadvertently.
Who may remedy faults?
Operator
Work designated with the sign “Operator”
may only be carried out by persons who
have been instructed in the safe operation
and maintenance on the wash plant
Electricians
Persons with a professional training in the
electro-technical area.
Customer Service
Work designated with the sign “Customer
Service” may only be done by the fitters of
Kärcher Customer Service or fitters who
have been authorised by Kärcher.
We hereby declare that the machine de-
scribed below complies with the relevant
basic safety and health requirements of the
EU Directives, both in its basic design and
construction as well as in the version put
into circulation by us. This declaration shall
cease to be valid if the machine is modified
without our prior approval.
The undersigned act on behalf and under
the power of attorney of the company man-
agement.
Authorised Documentation Representative
S. Reiser
Alfred Kärcher GmbH Co. KG
Alfred-Kärcher-Str. 28 - 40
71364 Winnenden (Germany)
Phone: +49 7195 14-0
Fax: +49 7195 14-2212
Winnenden, 2017-06-01
Note:
The equipment may only be installed by
– KÄRCHER service engineers
– persons authorized by KÄRCHER
The following requirements are necessary
in order to install the equipment:
– Horizontal even area, with a solid sur-
face with the dimensions 1,200 x 600
mm.
– Plant to be freely accessible for mainte-
nance jobs.
– Surrounding temperature not exceed-
ing 40 °C.
– Environment free of explosion risks.
– For electrical connection refer to techni-
cal specifications.
– For water connection refer to technical
specifications.
– Water drainage
Unpack the equpiment and dispose of the
packing material properly.
Fasten the anti-skid clamps for the ma-
chine feet to the floor.
Place the high pressure module with
the machine feet in the anti-skid
clamps.
Install the attachment set for suction
pipes or the attachment set for storage
tank according to the enclosed assem-
bling instructions.
Faults
Fault
Possible cause
Remedy
of whom
Pressure does not
build up in the pump
Leaks in the suction of the pipe system
Check screw fittings and hoses.
Operator
Water shortage
Remove the cause.
Operator
The valve in the pump is defective.
Bypass valve is not closing.
Replace valve.
Customer Ser-
vice
Pump is vibrating
strongly, the manom-
eter pointer is swing-
ing
Pressure tank is defect
Replace pressure tank
Operator
Pump is sucking air.
Check suction pipes
Operator
Valve plate or valve spring is defective.
Replace defect parts
Customer Ser-
vice
Safety valve gets ac-
tivated
Nozzles of the washing unit are blocked
Remove cause and replace safety valve.
Operator
High pressure valve in the pipe system
does not open
Customer Ser-
vice
Pump module does
not switch off
Pressure switch gets activated, thermal over-
load protection gets activated, motor protec-
tion switch is triggered. Water shortage
Follow fault messages of the washing plant. Remove
fault according to the details provided in the operat-
ing instructions for the washing plant.
Operator/Cus-
tomer Service
Water or oil leak at
the pump
Washers are worn out
Replace washers
Customer Ser-
vice
Bypass valve does
not get activated
Compressed air supply
Remove the cause.
Operator
Cable is defect
Remove the cause.
Customer Ser-
vice
High pressure distrib-
utor portal/ under-
body cleaning does
not switch on
Compressed air supply
Remove the cause.
Operator
Cable is defect
Remove the cause.
Customer Ser-
vice
EU Declaration of Conformity
Product:
High pressure cleaner
Type:
2.640-xxx
Type:
2.641-xxx
Type:
2.642-xxx
Relevant EU Directives
2006/42/EC (+2009/127/EC)
2014/30/EU
Applied harmonized standards
EN 55014–1: 2006+A1: 2009+A2: 2011
EN 55014–2: 2015
EN 60335–1
EN 60335–2–79
EN 61000–3–2: 2014
EN 61000–3–11: 2000
EN 62233: 2008
Chief Executive Officer
Head of Approbation
Installing the unit (only for
experts)
Preparing the installation place
Unpack the equipment
Aligning the unit and installing it
Assemble the installation parts
18
EN
Summary of Contents for HD 30/6
