T600 Tag Tester
DOC#:
UM 360420-835
REVISION F
Page 47 of 55
© Kapsch TrafficCom Canada Inc. 2022
These drawings and specifications contain confidential and proprietary information and are the property of Kapsch TrafficCom Canada Inc. and are issued in strict confidence
and will be kept confidential and used solely for the purpose intended and for no other purpose and shall not be transmitted, reproduced, copied, and/or used as the basis for
manufacture or sale of apparatus unless otherwise agreed to in writing by Kapsch TrafficCom Canada Inc.
FILE: UM 360420-835 REV F, T600 OPERATOR AND MAINTENANCE MANUAL.DOCX 03/28/2022 3:02
Kapsch TrafficCom
The internal TTU bar code scanner cannot read the OBU bar code
An OBU can pass the tag test, even if its bar code was not read successfully. When this happens, an error message is
not generated, but the
Label Agency ID
and
Label Serial Number
fields in the
Bar code Data
area display
Unreadable
.
The TTU cannot read the OBU bar code or the OBU tag data
If the TTU cannot read the OBU bar code or the OBU tag data, you are prompted to manually enter the bar code
information (see
Entering the OBU bar code number
, page 22). You cannot proceed until a valid bar code number is
entered.
Resolving a missing calibration file error
If the T600 attempts to test an OBU, and the T600 cannot locate a calibration file for that OBU type, the T600 displays
this error message: This model can’t be tested, perha
ps due to a missing calibration file. Check that the proper
calibration file exists:
Click
Calibrate
.
Check that there is a calibration file listed for the OBU type you are trying to test.
If the OBU type is not listed, or the file type is marked with a red X and not a green checkmark, the calibration
file cannot be located.
To find a missing calibration file:
Note the TTU serial number.
Look in the folder containing the T600 files. Check all calibration files (*.cal). The correct calibration file will have
the TTU serial number and tag type in the file name.
If the calibration file cannot be found, contact Kapsch TrafficCom Canada Inc. to have the T600 calibrated for
that OBU type.
