T600 Tag Tester
DOC#:
UM 360420-835
REVISION F
P
age 22 of 55
© Kapsch TrafficCom Canada Inc. 2022
These drawings and specifications contain confidential and proprietary information and are the property of Kapsch TrafficCom Canada Inc. and are issued in strict confidence
and will be kept confidential and used solely for the purpose intended and for no other purpose and shall not be transmitted, reproduced, copied, and/or used as the basis for
manufacture or sale of apparatus unless otherwise agreed to in writing by Kapsch TrafficCom Canada Inc.
FILE:UM 360420-835 REV F, T600 OPERATOR AND MAINTENANCE MANUAL.DOCX 03/28/2022 3:02
Kapsch TrafficCom
NOTE:
Do not move or remove the OBU while the test is in progress. The test aborts if
the proximity sensor cannot detect the OBU in the TTU cradle.
Click
Test Start
or press CTRL+A to begin testing. The Test in Progress message displays on the user interface and
the TEST IN PROGRESS LED on the front of the TTU illuminates red.
If the T600 cannot read or recognize the OBU data and the internal bar code scanner cannot read the OBU bar
code, you are prompted to manually enter the bar code number (see
Entering the OBU bar code number
, page
22). You cannot proceed until you enter a valid bar code number.
After a few seconds, testing completes and the test result displays at the bottom of the T600 user interface.
Remove the OBU from the TTU. The T600 Tag Tester is ready to test the next OBU.
If the OBU fails the tag test, contact Kapsch TrafficCom Canada Inc. to arrange an RMA so the OBU can be
returned.
Entering the OBU bar code number
If the TTU cannot read or recognize an OBU in its cradle during testing, it scans the OBU bar code. If the TTU cannot
scan the OBU bar code, you must manually enter the bar code information or scan the OBU bar code with the optional
hand-held scanner.
Prerequisites:
- The Transponder Bar Code Label window (Figure 3-1) is active.
- To use the optional hand-held bar code scanner, the scanner must be installed according to the
manufacturer’s instructions.
Remove the OBU from the TTU cradle.
WARNING:
DO NOT STARE DIRECTLY AT THE LASER BEAM EMITTING FROM THE HAND-
HELD BAR CODE SCANNER. LASER LIGHT CAN CAUSE EYE INJURY AFTER
PROLONGED EXPOSURE. THE HAND-HELD BAR CODE SCANNER IS A CLASS 2
LASER PRODUCT.
If the optional hand-held bar code scanner is installed, scan the OBU bar code.
If the optional hand-held scanner is not installed or it cannot scan the bar code, use the customer-supplied
computer keyboard to enter the number on the bar code label in the Transponder Barcode Label dialog box
(Figure 3-1). You cannot proceed until you enter a valid bar code number.
Once the bar code number has been entered, the test results are displayed on the user interface.
