T600 Tag Tester
DOC#:
UM 360420-835
REVISION F
P
age 16 of 55
© Kapsch TrafficCom Canada Inc. 2022
These drawings and specifications contain confidential and proprietary information and are the property of Kapsch TrafficCom Canada Inc. and are issued in strict confidence
and will be kept confidential and used solely for the purpose intended and for no other purpose and shall not be transmitted, reproduced, copied, and/or used as the basis for
manufacture or sale of apparatus unless otherwise agreed to in writing by Kapsch TrafficCom Canada Inc.
FILE:UM 360420-835 REV F, T600 OPERATOR AND MAINTENANCE MANUAL.DOCX 03/28/2022 3:02
Kapsch TrafficCom
T600 Tag Tester Unit (TTU)
The T600 has two RF channels each set to different power levels required to support communication with various
Kapsch TrafficCom Canada Inc. OBUs.
The T600 TTU antenna located under the tag cradle communicates with OBUs placed in the cradle during testing. A
test can only be initiated after a proximity sensor located in the cradle detects the presence of an OBU. A bar code
scanner located inside the T600 reads the serial number printed on the OBU label, while an optional external hand-
held bar code scanner may be used for the same purpose.
TTU antenna
The antenna is located underneath the OBU cradle.
TTU OBU cradle
The cradle is shaped to ensure the various OBUs are positioned correctly in the TTU. OBUs must be correctly
orientated in the cradle to achieve accurate test results (see ‘
: Correct orientation of the G4 OBUs in the TTU
Figure 2-2: Tag Tester Unit (TTU) - Front View
