Kantech IP Link Installation Manual Download Page 36

Page: 36 / 37

DN1670-1609

Network Configuration Information Sheet

IP Link Configuration in a Wide Area Network (WAN)

EntraPass Site

For more details, see Procedure 6: Defining the EntraPass Site on Page 14.

EntraPass Special Edition / Corporate Gateway

IP Address: ______.______.______.______

Router

Public IP Address:______.______.______.______

Domain name: ____________________________

Port Forwarding Checklist

For more details, see Procedure 8: Configuring the IP Link in a WAN/Internet on Page 17.

EntraPass Gateway Ports:

18001 (UDP) and

18801 (UDP) or 18802 (TCP)

IP Link Site

MAC Address: 00:50:F9: ______:______:______

IP Address Type:

Static or

Reserved DHCP

IP Address: ______.______.______.______
Subnet Mask: ______.______.______.______
Default Gateway (Router): ______.______.______.______
DNS Server IP Address:______.______.______.______

Router

Public IP Address:______.______.______.______

Domain name: ____________________________

Port Forwarding Checklist

Note 1:

If you are using more than one IP Link at the same remote site, you must use a unique port number for each IP Link

Note 2:

No port to forward in TCP.

IP Link Ports:

18803 (UDP) and

18810 (UDP) or _________

Summary of Contents for IP Link






































Search results

Summary of Contents for IP Link

Reviews:

Related manuals for IP Link

Brands by name

Popular brands

Kantech IP Link, Installation Manual

Search results

Summary of Contents for IP Link

Reviews:

Related manuals for IP Link

Brands by name

Popular brands