Kantech IP Link, Installation Manual

Page: 15 / 37

11
DN1670-1609
IP Link Installation Manual
1- Mounting the IP Link
The installation process consists of installing your IP Link and then configuring from EntraPass or the
KT-Finder, depending on the network configuration. First mount the IP Link, connect power and
grounding connections, then wire the controller loop to the IP Link.
The IP Link does not require any additional enclosures.
•
It must be mounted in a secure, yet accessible, location that supports the environmental conditions
listed in the environmental specifications. See
Table 3 on page 5 .
• Leave 23 cm (8 in) clearance space around the sides, and at least 33 cm (13 in) space in front.
• Avoid placing the IP Link near electrical or communication devices.
• Install the IP Link on the selected wall using four tapping screws fed through the mounting holes.
Mounting hole positions
2- Connecting the Earth Ground
Connect the provided green ground wire from the EARTH terminal to the cover screw. Use a single
conductor solid copper wire to ground the IP Link to a good earth ground as per the local building
code.
Earth grounding