Kantech IP Link, Installation Manual, Page: 10 / 37

DN1670-1609 6
Ordering Information
Models Available
• KT-IP : IP Link PCB with metallic cover and wall plate.
• KT-IP-PCB : IP Link PCB and parts.
• KT-IP-CAB : Cabinet. Use with KT-IP-PCB only.
Installation Manuals
All IP Link manuals are available as free downloads at www.kantech.com.
•
DN1670 - English
• DN1671 - French
• DN1672 - Spanish
• DN1692 - German
• DN1693 - Italian
Site Survey
Before starting the installation of the IP Link, you have to determine the configuration that best
corresponds to your network architecture. This information is crucial for the proper operation of the
Kantech products that you will install. Contact the Network Administrator of the site(s) where you will
install the IP Link so that they can provide you with all the network information.
Gather the network information required to configure the IP Link and complete the Network
Configuration Information Sheet provided at the end of this document.
We have divided this manual so that as soon as you determine the pertaining type of architecture and
environment, you can follow the configuration instructions that correspond to your environment before
connecting additional components.
Network Topology
Local Area Network (LAN)
A LAN connects network devices over a relatively short distance. A networked office building, school,
or home usually contains a single LAN, though sometimes one building will contain a few small LANs,
and occasionally a LAN will span a group of nearby buildings.
Table 6: Bill of Material
Item Description KT-IP KT-IP-PCB KT-IP-CAB
IP Link PCB with cover and wall plate 1 - -
IP Link PCB only - 1 -
Flat cable with RJ-12 male connector, 1.8 m / 6 ft. 1 1 -
Ground wire pack 1 1 1
Nylon standoffs 5 5 -
Light pipes 4 - -
Taping screws 4 - -
Installation manual DN1670 - English 1 1 -
Installation manual DN1671 - French 1 1 -
Cabinet - - 1