Kamstrup MULTICAL 402, Technical Description, Page: 106 / 113

MULTICAL® 402
106
Kamstrup A/S · Technical Description · 5512-742_M1_GB_01.2016
14.7 LogView HCW
14.7.1 Introduction and installation
Regarding ”Introduction”, ”Interface” and ”Installation” see paragraph 14.1 Introduction METERTOOL HCW since
it is similar for LogView HCW.
14.7.2 General information
”LogView HCW” (ordering no. 6699-725) is used for read-out of logging data from MULTICAL

For available logger data see paragraph 7.10 Data loggers.
402 calculator and
top modules (e.g. hourly data) as well as interval logging. The read data can be used for analysis and diagnostic
test of the heating installation. Data can be presented as table or graphics, tables can be exported to ”Microsoft
Office Excel”.
14.7.3 ”Log”
Select the required data function.
Interval Data allows interval reading of current MULTICAL

For read-out of "current" counter values select interval 1 and
repetition 1. Thereby one instantaneous reading is obtained.
402 counters at optional intervals between 1 and 1440
minutes as well as an optional number of repetitions of the
reading from 1 to 9999 times.
Daily Data, Monthly Data and Yearly Data enable reading of
logged data from MULTICAL

Info Data makes it possible to read out the latest 50 info
events from MULTICAL
402 including optional data
period and values.

402, the read-out includes date and
info code of the info event.
14.7.1 Help button
Contact The contact button gives you the links to Kamstrup’s website and mailbox.
Output
This function shows the latest functions used in the program.
User manual Links to the user manual for the meter on Kamstrup’s website.
14.7.2 About button
Lists LogView’s program version and revision numbers as
well as all sub-programs, their type numbers and revision
numbers for the entire LogView HCW program.