Kaltenbach KPS 501, Manual

Page: 53 / 268

KPS SERIES
Operation
M-UK-KPS--06
11/02/03 Page 53 of 138
KALTENBACH
4.6 Fitting Tools and equipment
CAUTION
Fitting Tools while the machine is ON can inflict grievous bodily
harm to persons. Fitting Tools is only allowed when the machine
is Stopped or Switched OFF.
Follow the STOP or LOCKOUT procedure before fitting or
removing Tools.
NOTICE
In connection with the possibility to hurt hands to sharp sides of
the material or Tools it is required to ware hand gloves.
4.6.1
Fixing Punch Tools
-
Follow the STOP procedure, Chapter
→ 4.4
-
Screw on the punch holder with the punch tool as firm as possible by hand
-
Fasten the punch holder with the special ring spanner
-
Check if the right mould for the punch tools is fixed
-
Check the correct position of the punch tools
4.6.2
Removing Punch Tools
-
Follow the STOP procedure, Chapter
→ 4.4
-
Release the punch holder with the special delivered ring spanner
-
Screw the punch holder off by hand completely and take it out of the machine
to change the punch tool
4.6.3
Fixing the knife in the shear unit
-
Follow the STOP procedure, Chapter
→ 4.4
-
Fix the top- or bottom-knife by means of the fixing bolts
-
Check the cutting tolerance
4.6.4
Removing the knife of the shear unit
-
Follow the STOP procedure, Chapter
→ 4.4
-
Make sure that the shear unit is in the right position
-
Release the top- or bottom-knife by taking of the fixing bolts