Kaltenbach KPS 501, Manual

Page: 89 / 268

KPS SERIES
Operation
M-UK-KPS--06
11/02/03 Page 89 of 138
KALTENBACH
4.10.12.2 Options
•
Marking unit present
6
ON
activate the automatic control for the marking unit.
OFF
deactivate the automatic control for the marking unit.
•
Cross transport
6
ON
activate the automatic control for the cross transport.
OFF
deactivate the automatic control for the cross transport.
•
Length check (option)
6
ON
the length of the material will be checked before processing (option).
OFF
the length of the material won't be checked, but the program will assume the
entered length.
•
Width measuring (option)
6
ON
the width of the material will be checked before processing (option).
OFF
the width of the material won't be checked, but the program will assume the
entered width.
• Open slide for front piece
6
ON
opens the output table during shearing front pieces.
OFF
the output table will remain closed during shearing front pieces.
•
Pushing through
6
ON
the carriage will automatic push an end piece through onto the output table.
OFF
the carriage won't push an end piece through onto the output table.
•
Automatic order run
6
ON
the machine processes the runs in the order in which they are shown on
screen, the order (sequence) can be edited.
OFF
the machine processes one selected run only.