Kaltenbach KPS 501, Manual

Page: 20 / 268

KPS SERIES Machine Information
M-UK-KPS--06
11/02/03 Page 20 of 138
KALTENBACH
1.2.8 Angle shear (DC Type 160*160*15)
Feautures
•
With the two-edges cutting method the material is being supported on two
sides of the cutting line.
This cutting action requires less force and prevents deforming of the material.
•
Multiple utilization of the tool by simply turning the lower blade.
•
Shortest product: 2 x the material thickness to be processed (min. 20 mm).
•
Rest piece: not smaller than the flange width.
•
A process without remnant is also possible by optimising the bar configuration
(no remnant cut).
•
A blade for angle steel for 50x50x5 to 160x160x15 mm is included in the
standard scope of supply.
•
Automatic program controlled tool lubrication via spray oil mist system.
Specifications
Working range
min Angle steel ..................... mm 50x50x5
max Angle steel...................... mm 160x160x15
Shear force ..................................... kN 750
Drive performance positioning drive shear unit ................. kW 2.2