Kaltenbach KPS 501, Manual

Page: 110 / 268

KPS SERIES
Technical Documentation
M-UK-KPS--06
11/02/03 Page 110 of 138
KALTENBACH
• Make sure of using the filling ring of the inner side of the mould at the flange
punch and check if they are correct installed in the right position.
•
Always mount the filling pieces enclosed to the punch holder and check
whether the tools are really secured after tightening.
•
Before using check whether the mould are well secured against turning.
• Reduction rings for dies are delivered with all triple-punch units (KPS503 /
KPSA206). These rings may only be used when the punch-force rises up to
maximal 25 tonnes. When bigger is needed, the large die (Ø63,5) must be
applied.