Kaltenbach KPS 501, Manual

Page: 81 / 268

KPS SERIES
Operation
M-UK-KPS--06
11/02/03 Page 81 of 138
KALTENBACH
4.10.8.1 Manual mode
By pressing the button the manual mode screen appears.
In this mode it is possible to control the machine manual.
X-position
Enter the X-position [mm] of the process
Y-position
Enter the Y-position [mm] of the process
Enter the diameter [mm] of the punching- or drilling process
Marking text
Enter the text, which has to be marked on the material by the marking unit
X-shear
Enter the x-position of the shearing angle
Y-shear
Enter the y-position of the shearing angle
Profile width
Enter the width of the profile [mm]
Process
Select the process (unit) for the entered coordinates:
Flange punch
Drilling
Index shearing
Center