Kaltenbach KPS 501, Manual

Page: 85 / 268

KPS SERIES
Operation
M-UK-KPS--06
11/02/03 Page 85 of 138
KALTENBACH
4.10.11 Tool manager
This menu displays the data for the available tools for the machine.
•
Punch diameter
-
The diameter of the punch for each Tool position.
•
Flange punch
-
The diameter of the punch for the flange punch units.
•
Lubrication frequency
-
Enter the amount of lubrication for each tool position.
For Example 5 means, each Fifth punch stroke there will be a small amount of
lubrication mist blown on the punch tool
•
Lubrication type
Only applied for the drill unit(s). Select the lubrication
type for each drill unit.
N = none
I = intern cooling
E = extern cooling