27
www.KALORIK.com
220131
•
Put the filters back together in the dust bin, then reinsert the dust bin
into your HUVI.
NOTE
: It is not recommended to clean the HEPA filter under running water
or get it wet.
CLEANING THE SENSORS
•
Use a soft cloth to gently wipe the front sensor, floor sensors, and
charging contacts.
•
Use a soft cloth to clean the signal sensor and charging pins on the
charging base.
CLEANING THE ROLLER BRUSH & SUCTION INTAKE
For optimal performance, clean the roller brush after a week of regular use.
Follow the instructions below to clean the roller brush.
•
Push the two
release tabs to unlock the sweep guard. Lift the roller
brush to remove.
Floor sensors
Charging contacts
Front sensor
Signal sensor
Charging pins
