Starting the machine and performing a test run
1. Start the machine and allow it to IDLE for at least 5 minutes.
2. Check the engine oil level.
Top off as necessary.
3. Visually inspect for leaks.
4. Shut down the machine.
10.3.5 Changing the engine oil filter
Material Spare parts
Common tools
Cleaning cloths
Oil receptacle
Precondition The machine is shut down,
the machine is fully vented, the pressure gauge reads 0 psig,
the engine is cooled down,
all compressed air consumers are disconnected and the air outlet valves are open.
Danger of burns from hot components and escaping engine oil!
➤ Wear long-sleeved clothing and protective gloves.
Fig. 39 Changing the engine oil filter
1
Engine oil filter
2
Direction of rotation to unscrew the filter
3
Engine
4
Oil dipstick
1. Open the canopy.
2. Prepare a receptacle.
3. Note the direction of rotation
2
to unscrew the oil filter.
4. Unscrew the engine oil filter
1
. Catch any escaping oil.
5. Carefully clean sealing surfaces using lint-free cloth.
6. Lightly oil the new filter's gasket.
7. Turn the oil filter clockwise by hand to tighten.
10 Maintenance
10.3 Drive engine maintenance
110
Operator Manual Screw Compressor
MOBILAIR M27
No.: 9_9547 13 USE
