Fig. 53 Tool lubricator maintenance
1
Metering knob
2
Filler plug with dipstick and integrated riser
tube
3
Tool lubricator upper part with oil filling
port
4
Oil tank
5
Compressed air inlet
6
Tool oil outlet
➤ Open the canopy.
Checking the tool lubricator oil level
Check the oil level daily.
A dip stick is attached to the underside of the oil filler plug with which to measure the oil level.
The oil level should be in the upper third of the dipstick.
1. Slowly unscrew and withdraw the oil filler plug.
2. Wipe off the dipstick with a lint-free cloth or rag and screw the plug fully in again.
3. Unscrew and withdraw the plug once more and read off the oil level on the dipstick.
Below required filling level.
➤ Top off the lubricant.
4. Close the canopy.
Filling and topping off with tool lubricator oil
1. Slowly unscrew and withdraw the oil filler plug.
2. Use a funnel to pour in the oil to the maximum level (0.4 - 0.6 inches below the top of the tank).
3. Check the oil level.
4. Check the filler plug O-ring for external damage.
O-ring is damaged.
➤ Replace the O-ring.
5. Insert the plug to close the oil filler port.
6. Close the canopy.
Further information See chapter 2.8.1 for suitable oil grade and volume.
10 Maintenance
10.8 Maintenance for Optional Items
No.: 9_9547 13 USE
Operator Manual Screw Compressor
MOBILAIR M27
137
