Kaco blueplanet 110 TL3, Manual

Page: 66 / 119

Country-
spec. Set-
tings Level Display/
settings
Action in this menu/meaning
4 1 2 3 4
3rd party device
NOTE: Configures the grid shutdown via an external device
connected to the digital input of the device
3rd party device name F Enter the name of the external device.
3rd party device opera-
tion mode
On | Off
F Select operating mode.
On: The digital signal of the external device must be present on the digi-
tal input so that the device does not shut down.
Off : The device does not check whether an external system is integrated
into the PV system.
4 1 2 3 4
Password protection
Status
1. Option to set password protection.
2. Confirm the action field.
4 1
2
3 4
SPD monitoring
NOTE: Opportunity to check the overvoltage protection with
appropriate status messages.
4 1 2 3 4
SPD monitoring
Status
Password protection
Status
1. Activate overvoltage protection.
2. Activate optional password protection.
3. Confirm the action field.
4
1
2
3
4
Q on Demand
NOTE: Activate function only with explicit permission of the
network operator. Additional conditions:
- No PID solution connected to the unit.
- Constant voltage regulator in the unit is deactivated
. See table : Con-
figuration via web user interface [ } Page 49]
4 1 2 3 4
Night Shutdown
Check to activate
1. Q on Demand is activated by deactivating the night shutdown.
2. Transfer selection to memory.
3. Observe the information window and activate the function with the
"OK" button if necessary.
NOTE: The currently specified reactive power settings are
used. Power-dependent functions are not used.
NOTE: If AC is disconnected during the night, the function is
only available the next day.
4 1
2
3 4
Relay
NOTE: Opportunity to configure the fault signal relay [ERR].
4 1 2 3 4
Relay
Positive logic | Neg-
ative logic
inactive | active
1. Select the type of logic.
2. Select the form of activity.
3. Confirm the action field.
4 1 2
3
4
Logging Management
NOTE: Input screens for log and service data and default set-
tings.
4 1 2 3 4
Settings Specify the interval for data capture and base meters.
4 1 2 3 4
Benutzer Logging-Inter-
vall
1 | 5 | 10 | 15 [min-
utes] / 5
F
Specify the time period between 2 log data recordings.
NOTE: Setting and duration until memory is overwritten: 1min
– 5 days; 5min – 4,5 years; 10 min – 9 years; 15 min – 14 years.
4 1 2 3 4
Service logging interval
1 – 120 [sec] / 10
[sec] / 1
F Specify the time period between 2 log data recordings.
NOTE: Setting and duration until memory is overwritten: 1 sec
– 9 days; 10 sec – 92,5 days; 120 sec - 1110 days
9 | Configuration and operation Manual
KACO blueplanet 110 TL3 KACO blueplanet 125 TL3 Page 66
EN-US