Fig. 59:
>Device and hardware information interface
Bereich
Description
Device
Displays the serial number, device name, grid type, local in-
stallation location and time
Software
Displays the firmware package installed
Network
Displays the current grid parameters
Tab. 7:
Description of the areas
9.4
Menu structure
NOTE
Protection of special grid parameters
x)
by means of a password
(
x)
not network parameters!)
1. As soon as the password has been activated, this also applies to external change requests (e.g. via MOD-
BUS or other external interfaces).
2. You will be asked to enter the password if you would like to change a protected grid parameter. Once you
have entered the password, protection will be disabled for all protected grid parameters (including the
password protection setting) for 15 minutes. Protection is reactivated automatically after this time has
elapsed.
3. If you attempt to disable a protected parameter group, you will have to enter the password first unless it
was entered earlier in the session.
4. As soon as a set of configuration parameters has been exported, the password is part of this configuration.
5. If the configuration has been imported into another device, then the other device will have the same pro-
tection status. If the other device already had protection and the password for the new configuration is dif-
ferent, then the new configuration will be rejected.
Manual
Configuration and operation | 9
KACO blueplanet 110 TL3 KACO blueplanet 125 TL3
Page 47
EN-US