Kaba ILCO FDU User Manual Download Page 76 | Manualshive

Page: 76 / 276

Kaba ILCO FDU User Manual Download Page 76

Front Desk Units - Using and Programming

Kaba Ilco Lodging Access Control System

65

keycards and can download to the locks as required.

Do not adjust internal time

according to seasonal time changes.

The FDU also keeps current time.

Current time is used to display expiries and audit

information in local time. This time is changeable so the FDU may be adjusted to
seasonal time changes.

An example of the use of the current time is in making pre-registered keycards. The
arrival time of the guest is specified in the current time, and the FDU automatically
encodes the correct internal time on the keycard so that the keycard becomes valid at
the time expected by the staff member using the FDU.

Shortcut:

Swipe a GMA keycard, press 7, 2, 3 and 1

Default: Disabled

Options:

YES: Enabled

NO: Disabled

When set to YES as shown above, 1 hour is added to the system time to account for
daylight savings time. An asterisk (*) on “Local Time” indicates daylight savings time
is active. When set an asterisk (*) will also be shown next to the time on the status line
from the main screen.

By default the DST adjustment is set to NO and the current time shown in the FDU
will be standard time.

Press the left <

W

> or right <

X

> arrow to toggle between daylight savings time (YES)

and standard time (NO). Press < > to save the setting.

3.6.11. Folio Number

Purpose: Certain

properties may use Folio Numbers for guests to make POS purchases. The

Folio Number feature must be enabled in order for a folio number to be entered and
encoded when issuing a Guest keycard.

«
...
74
75
76
77
78
...
»

Summary of Contents for ILCO FDU





















































































































































































































































































Reviews:

No comments