manualshive.com logo in svg

Kaba ILCO FDU, User Manual, Page: 194 / 276

Share
Download
Kaba ILCO FDU User Manual Download Page 194

Auditing

Kaba Ilco Lodging Access Control System 

 

183

03/20/2007  7:49A       1
PROGRAMMING
Auth 200  FDU No. 1
Sequence ID 8751-001
Creation 03/19/2007  3:54P

Most recent audit entry in memory, 
showing that a programming keycard was 
used (to download the audit), and the 
sequence ID of the keycard (to identify 
the staff). 

03/20/2007  7:48A       2
GUEST
Auth 200  FDU No. 1
Sequence ID 9705-005
Creation 03/20/2007  7:48A

Second most recent audit entry showing 
the usage of a guest keycard, time of 
entry, and the user authorization level that 
created the guest keycard. 

03/20/2007  7:46A       3
OVERRIDE
Auth 200  FDU No. 1

Third most recent audit entry showing the 
usage of the FDU to perform an override 
on the lock, and the user. 

Figure 7.1: 

Sample of printed lock audit, includes access and automation information.

The FDU can store the full audit trail from up to 10 locks at a time. Each audit may be 
selected individually, scrolled on the screen, printed, saved on a PC or deleted from FDU 
memory as required. If a lock is audited twice, the top audit in the Front Desk Unit will 
always be the older one. 

Auditing a RAC is done in the same manner as auditing a lock. 

7.1.1 

Auditing Locks Using the FDU 

IMPORTANT:  Do not attempt to read or encode any keycard (including 

Authorization, Programming and Initialization keycards) while the 
communication cable is connected between the FDU and the lock 
or RAC. Connect the cable just before sending or reading the 
information.

Purpose:

  

To obtain the audit trail stored in the lock’s non-
volatile memory. 

Minimum keycard required:

 Programming 

Authorization 

Equipment Required:

 FDU 

FDU to lock communication adapter 

Programming keycard 

Summary of Contents for ILCO FDU





















































































































































































































































































Reviews:

No comments